Gas Hoses & Accessories

   
50036 marshall high pressure gas hoses-th.jpg
HIGH PRESSURE LP GAS HOSES 1/4" I.D.
$7.59
50036
1/4"ID, 3/8"MPT x 3/8" Female Flare Swivel. The thermoplastic hose assemblies have a working pressure of 350 psi with 1700 psi burst rating. All assemblies up to 60" L are UL and CGA listed.
Quantity
   
50100 marshall high pressure gas hoses-th.jpg
HIGH PRESSURE LP GAS HOSES 1/4"I.D. 3/8"FPT x 3/8" FEMALE FLARE SWIVEL
The thermoplastic hose assemblies have a working pressure of 350 psi with a 1700 psi burst rating. All assemblies up to 60"L are UL and CGA listed.
H-PRES. LP GAS HOSES 24"L $7.59
Quantity
H-PRES. LP GAS HOSES 36"L $11.29
Quantity
H-PRES. LP GAS HOSES 48"L $13.09
Quantity
H-PRES. LP GAS HOSES 72"L $17.59
Quantity
H-PRES. LP GAS HOSES 144"L $30.95
Quantity
   
50263 marshall high pressure gas hoses-th.jpg
HIGH PRESSURE LP GAS HOSES 3/8"I.D. 3/8"MPT x 1/2" FEMALE FLARE 36"L
$11.99
50263
The thermoplastic hoses have a working pressure of 350 psi with a 1700 psi burst rating. All assemblies up to 60"L are UL and cga listed. 3/8"I.D. 3/8"MPT x 1/2" Female Flare 36"L.
Quantity
   
50266 marshall high pressure gas hoses-th.jpg
HIGH PRESSURE LP GAS HOSES 3/8"I.D. 3/8"MPT x 3/8" FEMALE FLARE SWIVEL
The thermoplastic hoses have a working pressure of 350 psi with a 1700 psi burst rating. All assemblies up to 60"L are UL and cga listed. 3/8"I.D. 3/8"MPT x 3/8" Female Flare swivel.
H-PRES. LP GAS HOSES 24"L $8.99
Quantity
H-PRES. LP GAS HOSES 30"L $9.99
Quantity
   
50379-low-pressure.jpg
LOW PRESSURE LP GAS HOSE 3/8"I.D. 3/8"MPT x 3/8"MALE FLARE 42"L
$11.99
50379
3/8" I.D. Low pressure hose assembly 3/8"MPT x 3/8" Male Flare.
Quantity
   
50261 marshall high pressure gas hoses-th.jpg
LOW PRESSURE LP GAS HOSES 3/8"I.D. 3/8"MPT x 1/2" FEMALE FLARE SWIVEL
The thermoplastic hose has a working pressure of 350 psi with a 1750 psi burst rating. All assemblies up to 60"L are UL and CGA listed. they must always be installed downstream from a low-pressure 11" water column regulator.
L-PRES. LP GAS HOSE 24"L $9.19
Quantity
L-PRES. LP GAS HOSE 36"L $10.59
Quantity
L-PRES. LP GAS HOSE 40"L $11.49
Quantity
   
50730-marshall.jpg
MARSHALL TYPE I ACME NUT PIGTAILS
Featuring the easy to use Female 1-5/16"ACME Nut. Type 1 ACME Nut Pigtail x 1/4" inverted flare.
12" ACME PIGTAIL x 1/4" INVERTED FLARE $14.49
Quantity
15" ACME PIGTAIL x 1/4" INVERTED FLARE $18.49
Quantity
18" ACME PIGTAIL x 1/4" INVERTED FLARE $13.99
Quantity
20" ACME PIGTAIL x 1/4" INVERTED FLARE $17.29
Quantity
24" ACME PIGTAIL x 1/4" INVERTED FLARE $18.99
Quantity
30" ACME PIGTAIL x 1/4" INVERTED FLARE $16.29
Quantity
36" ACME PIGTAIL x 1/4" INVERTED FLARE $20.95
Quantity
40" ACME PIGTAIL x 1/4" INVERTED FLARE $17.99
Quantity
48" ACME PIGTAIL x 1/4" INVERTED FLARE $19.99
Quantity
60" ACME PIGTAIL x 1/4" INVERTED FLARE $22.95
Quantity
15"ACME PIGTAIL x 1/4" MPT $14.49
Quantity
20"ACME PIGTAIL x 1/4" MPT $15.79
Quantity
   
50290-extend-a-flow.jpg
MARSHALL EXTEND-A-FLOW KIT
$111.29
50290
Extend-A-Flow Kit allows the RV owner to fuel small, portable, high pressure propane appliances such as camp stoves, lanterns and table top grills directly from the fuel supply on their own RV or cottage rather than using the small, expensive, throwaway propane cylinders that are designed to normally thread in to these appliances. The kit includes a listed brass tee fitting, a 12' flexible hose and complete directions for installation, use and storage.
Quantity
   
50244 extend a flow tee-th.jpg
MARSHALL BRASS EXTEND-A-FLOW TEE
$39.95
50244
Extend-A-Flow Tee listed for OEM use, Excess flow POL x female POL x Male 1"20
Quantity
   
50513-high-pressure.jpg
LP GAS APPLIANCE HIGH PRESSURE ADAPTER HOSES
The 40407 adapter hose has a safe, convenient, "user-friendly" design that makes it ideal for hooking up portable, high pressure propane appliances like camp stoves, lanterns and table top grills to large cylinders. This hose eliminates the need for the small, yet expensive disposable cylinders normally used to fuel these appliances. One end of the hose is a soft nose handwheel POL which requieres no wrench for tightening, and fits all propane vapor cylinder valves. The other end has a brass 1"-20 male swivel fitting that threads into the appliance.
APPLIANCE HIGH PRESSURE HOSE 4FT. $17.19
Quantity
APPLIANCE HIGH PRESSURE HOSE 5 FT. $31.10
Quantity
APPLIANCE HIGH PRESSURE HOSE 12FT. $32.95
Quantity
   
50872 lp gas pigtails-th.jpg
MARSHALL LP GAS PIGTAILS
The flexible thermoplastic hose material is rated at 3500 psi working pressure and has a burst rating of 1750 psi. End fittings are secured with proven, 4-jaw crimped copper rings. Together they offer an assembly that meets all applicable UL and CGA tests and requirements. All assemblies up to 60"L are UL and CGA listed, and approved for use on RVs. 1/4" I.D. high pressure assembly. P.O.L. x 1/4" inverted flare.
LP GAS PIGTAIL 12" L $9.49
Quantity
LP GAS PIGTAIL 15" L $9.99
Quantity
LP GAS PIGTAIL 20" L $10.59
Quantity
LP GAS PIGTAIL 24" L $11.49
Quantity
LP GAS PIGTAIL 30" L $11.99
Quantity
LP GAS PIGTAIL 36" L $12.99
Quantity
LP GAS PIGTAIL 48" L $15.99
Quantity
LP GAS PIGTAIL 60" L $17.29
Quantity
   
50526-extend.jpg
MARSHALL EXTEND-A-STAY KIT
"Extend-A-Stay Kit allows motor home owners to hook up to an auxiliary propane cylinder or tank so they can stay where they want for as long as they want without having to periodically move their rig to fill the propane tank. The Standard kit includes illustrated instructions for installations and proper use, a listed brass tee fitting, and a 5Æ flexible pigtail for hooking up the auxiliary tank or cylinder when parked for an extended stay. The Deluxe kit features an additional 12Æ Extend-A-Flow nose to let the owner enjoy additional benefits such as hooking up portable lanterns, camp stoves and table top grills. Tee fittings in these kits are listed and approved for use on RVs."
CLASS A EXTEND-A-STAY KIT: DELUXE $111.95
Quantity
CLASS A EXTEND-A-STAY KIT: STANDARD $74.95
Quantity