Gooseneck Ball Hitches
atwood-folding-gooseneck-hitch-ball.JPG ATTWOOD FOLDING GOOSENECK HITCH BALL
Atwood offers a machined 2 5/16" hitch ball that folds down flush with the truck bed when not in use, leaving the bed clear for full utilization. Comes with safety chain tie down loops that work in conjunction with our #SC3835 and #SC71637 Safety Chains.
ATTWOOD 2 5/16" FOLDING BALL GN HITCH 12X14, 25K 5116 $163.95
FOLDING BALL INSTALLATION KITS CLICK ON ORDER # TO PURCHASE
FOLDING BALL
GOOSENECK HITCH
Installation
Kit
Year
Model
Order #
CHEVY/GMC PICKUPS, 2 & 4WD
07
 New 2500 HD/3500, 6-1/2' & 8' Bed
99-07 Silverado/Sierra 1500 & 2500 LD & HD, 6-1/2' Bed. (Will not fit 05 1500HD 6' Box w/above frame fuel line)
99-07 Silverado/Sierra 1500 & 2500 LD & HD, 8' Bed
01-07 2500 HD/3500 HD, 6-1/2' & 8' Bed
DODGE PICKUPS, 2 & 4WD
94-02 Ram, 1500, 2500 & 3500, 6-1/2' & 8' Bed (except 2002 Ram 1500)
02-08 Ram 1500, 6-1/2' & 8' Bed
03-08 Ram 2500HD & 3500, 6-1/2' & 8' Bed
FORD PICKUPS, 2 & 4WD
08
 F-250SD, F-350 & F-450, 6-1/2' & 8' Bed
80-96 F-150, 6-1/2' & 8' Bed
80-98 F-250 & F-350, 6-1/2' & 8' Bed
97-03 F-150 & F-250 Lt. Duty (old body)
6-1/2' & 8' Bed
04 F-150 Heritage (old body style) 6-1/2' & 8' Bed
99-07 F-250SD & F-350, 6-1/2' & 8' Bed
$0.00
bwhitch.jpg B&W TURNOVER HITCHES
The B & W Turnover Ball™ System converts from a towing unit to a level bed in less than 30 seconds. Another much appreciated benefit is the ease of installation. The hitch bolts directly to the frame under the bed using the existing holes already there. Capacity rated at 30,000 lbs, tongue weight of 7,500 lbs. $0.00
BW TURNOVER BALL APPLICATION CHART

 

PART # MFR # MODEL           PRICE
CHEVY/GMC
 97-1000 1000 1988-1998 Chevrolet & GMC 1/2, 3/4, & 1 Ton Long Bed Truck
1999-2000 Chevrolet & GMC 3/4 & 1 Ton Heavy Duty Long Bed Trucks (Full C- Channel Frame)		 $419.95
97-1050  1050 1988-1998 Chevrolet & GMC 1/2, 3/4, & 1 Ton Short Bed Truck
1999-2000 Chevrolet & GMC 3/4 & 1 Ton Short Bed Trucks (Full C- Channel Frame)		  $419.95

 97-1059

 1059

 1999-2007 Chevrolet & GMC 1/2 & 3/4 Ton Light Duty All Beds 
(Tube Frame changing to C-Channel before axle)		  $419.95
97-1062  1062 2001-2007 Chevrolet & GMC 1 Ton Truck (With 2 Bed Crossmembers over the axle) (TJ5052)  $419.95
 97-1057  1057 2007-2012 Chevrolet & GMC 1/2 Ton SHORT BED ONLY New Boxed Frame  $419.95
 97-1134  1007 2007-2012 Chevrolet & GMC 1/2 Ton LONG BED ONLY New Boxed Frame  $419.95
97-1067  1067 2001-2010 Chevrolet & GMC 3/4 Ton Heavy Duty Short & Long Bed Trucks
2007-2010 Chevrolet & GMC 1 Ton (New Body) (With 1 Bed crossmember over the Axle) (TJ5053)		  $419.95
 97-1109  1011 2011- 2012 Chevrolet & GMC 3/4 & 1 Ton HD Long & Short Bed Trucks (TJ5064)  $419.95
 97-1400  1400 1973-1987 Chevrolet & GMC 1/2, 3/4, & 1 Ton (Requires Drilling)  $419.95
 FORD
 97-1100  1100 1980-1998 Ford 3/4 & 1 Ton WITHOUT Overload Springs (TJ5057)  $419.95
 97-1110  1110 1980-1998 Ford 3/4 & 1 Ton WITH Overload Springs (Requires Drilling 2 Holes) (TJ5060)  $419.95
 97-1150  1150 1980-1996 FORD 1/2 Ton Trucks All Beds  $419.95
 97-1197  1197 1997-2003 Ford 1/2 & light Duty 3/4 Ton Trucks & 2004 Heritage Edition  $419.95
 97-1104  1104 2004-2012 Ford 1/2 Ton Trucks  (TJ5049)  $419.95
 97-1108  1108 1999-2010 Ford 3/4 & 1 Ton Super Duty Long and Short Bed Trucks  (TJ5050)
2008-2010 F450 w/factory installed bed		  $419.95
 97-1211  1111 2011- 2012 Ford 3/4 & 1 Ton Super Duty Long and Short Bed Trucks   (TJ5061)
2011- 2012 F450 w/factory installed bed		  $419.95
 DODGE   
 97-1394  1394 1994-2001 Dodge 1/2 Ton Trucks All Beds   (TJ5059)
1994-2002 Dodge 3/4 Ton & 1 Ton all Beds		  $419.95
 97-1316  1316 2002-2008 Dodge 1/2 Ton Long and Short Bed (Except Mega-Cab)  $419.95
 97-1307  1307 2006-2012 Dodge 1/2, 3/4, & 1 Ton MEGA-CAB Trucks Only  (TJ5054)
2010-2012 Dodge 3/4 & 1 Ton Long Bed & Short Bed Gas Engine Trucks		  $419.95
 97-1309  1309 2009-2012 Dodge 1/2 Ton Trucks All Beds (only 4685 and RVK3000 with special post RVP3021
work with this hitch)		  $419.95
 97-1310  1310 2003-2012 Dodge 3/4 & 1 Ton Long and Short Bed Trucks ( Except Mega-Cab)  (TJ5056)
DOES NOT FIT Mega-Cab NOR 2010-2012 3/4 & 1 Ton Long Bed Gas Engine Trucks		 $419.95
 97-1300  1300 1973-1993 Dodge 1/2, 3/4, & 1 Ton Trucks (Requires Drilling)  $419.95
 TOYOTA   
 97-1251  1251 2000-2006 Toyota Tundras All Beds  $419.95
  1257 2007-2012 Toyota Tundra All Beds (4585 is the sole accessory that works with this hitch) $419.95
 NISSAN   
 97-1208  1208 2004-2012 Nissan Titan All Beds  $419.95
 FLATBED   
97-1500 1500 Flatbed Kit 6" x 8" -1/2"  - 1/8" Socket Top Stick Out (TJ5065) $209.95

 

 BW TURNOVER BALL APPLICATION CHART $0.00
gooseneck-channels.JPG GOOSENECK CHANNELS
A real time saver for Gooseneck hitch installers! When equipping pick-ups for gooseneck trailer towing, use precut channels for under-the-bed installation of hitch balls with either a 1 1/4" or 2 3/16" shank. These 6" wide channels are available in 38", 42" or 44” lengths to fit most 1/2 thru 1-ton pickups.
GN CHANNEL 6"X38" WITH 1 1/4" BALL HOLE 638CP $78.31
GN CHANNEL 6"X38" WITH 2 3/16" SMOOTH SHNK CLLR 638CS $86.78
GN CHANNEL 6"X42" WITH 1 1/4" BALL HOLE 642CP $87.92
GN CHANNEL 6"X42" WITH 2 3/16" SMOOTH SHNK CLLR 642CS $96.42
GN CHANNEL 6"X44" WITH 1 1/4" BALL HOLE 644CP $88.44
GN CHANNEL 6"X44" WITH 2 3/16" SMOOTH SHNK CLLR 644CS $98.17
wallace-forge-gooseneck-hitch-plates.jpg GOOSENECK HITCH PLATES
Heavy Duty Gooseneck Plates are economical and offer universal installation. Hitch plate 153010 is equipped with two 5/8” D-rings for safety chain attachment points.
WF GN HITCH PLATE 2 5/16 1" RISE 25K W/D-RINGS 153010 $157.95
GN CHANNEL 1 1/4" HOLE 18 1/4 X 42 W/2 1/2"RISE GNP $124.14
tj5113-gooseneck-adapter.jpg RANCH ADJUSTABLE GOOSENECK ADAPTER
The Ranch Hitch adapter easily converts your 5th wheel to a gooseneck trailer to fit a 2-5/16" ball and is rated at 24,000 lb. GVW, and 6,000 lb. tongue weight. It features a 3" vertical adjustment and is the only adapter on the market with a remote latch release. No need to get into the bed to lock or release the hitch. TJ5113 $399.99
ranchhitchadapter8lrg.jpg RANCH HITCH ADAPTER W/8” OFFSET
The same great Ranch Hitch Adapter is now available with an 8" offset for use with short bed trucks. It features a remote cable to couple and uncouple the ball, vertical adjustment, and belled coupler for easy alignment onto your ball. It is V19 certified for 24,000 lbs. trailer weight with 6,000 lbs. vertical weight. All parts are the same except that the coupler is on an offset stinger so installation is virtually the same
RANCH HITCH ADAPTER W/8” OFFSET 5212 $449.99
8" OFFSET ADAPTER STINGER & CABLE SYSTEM (bottom insert only) 5211 $319.95
tj5117-colibert.jpg COLIBERT 5TH WHEEL GOOSENECK ADAPTER
Colibert Enterprises has introduced a revolutionary way to get the most from both your Fifth Wheel Trailer and your Pickup Truck. Of course the Model 205 and Model 206 didn't exactly fall off the vegetable wagon yesterday! They have been in service for a few years! this system has been tested by time and by our customers...under the most severe conditions possible...the real world! Ease of coupling and uncoupling, Safe Design and Quality Engineering, Installs easily, All the parts you need! TJ5117 $499.95
06988-husky.jpg HUSKY GOOSENECK TRAILER HITCH "BALL PLATFORM"
The Gooseneck Trailer Hitch Ball Platform is used to tow trailers which utilize a gooseneck coupler such as livstock trailers and farm equipment, etc. Requires Base Rail Kit (SOLD SEPARATELY - SEE BELOW FOR OPTIONS) 31368 $239.95
07058-brackets.jpg HUSKY CUSTOM BASE RAIL KIT
Use with custom bracket kits located below 31323 $89.95
BASE RAILS AND BRACKET KITS CLICK ON PRODUCT # TO PURCHASE
Required- Custom Bracket Kit *Use with #31323 Base Rail listed below*
Bracket Part #
 
PICKUP DESCRIPTION
Bed Length
  Attachment Type Price
Year
Make
Model
Chevrolet/GMC
31396
   07-12

Chev/GMC

 Silverado & Sierra 1500 New Body (GMT 900)
6 1/2' & 8'
Custom brackets with hardware kit drilling required
 $239.95
 
99-10
Chevy/GMC

Silverado& Sierra, All (Includes up to 07 Classic) plus07-09 2500HD and 3500
6-1/2' & 8'
Custom brackets with hardware kit
drilling required
 $89.95

31397

  
01-10
Chevy/GMC

01-10 2500/3500 with or without integrated brake controller 99-07 Classic 1500
6-1/2' & 8'
Custom brackets with hardware kit
drilling required
 $239.95
31852   11-12
Chevy/GMC
 Pickup 2500/3500
6-1/2' & 8'
 Custom brackets,No Drill (frame) Bolt on $239.95
31853   11-12
Chevy/GMC
 Pickup 2500/3500
6-1/2' & 8'
 Coming Soon $193.95
 
88-98
Chevy/GMC
 C/K Pickup 1500, 88-99 C/K Pickup 2500/3500
6-1/2' & 8'
Offset & straight "L" brackets w/hardware kit drilling required
 $89.95
 
87-Older
Chevy/GMC
 Pickup
6-1/2' & 8'
Universal bracket kit, drilling required
 $89.95
Dodge
31565
  
07-08
Dodge
 Ram Pickup 1500
6-1/2' & 8'
Custom brackets, drilling required
 $136.95
31413
  
07-08
Dodge
 Ram Pickup 1500
6-1/2' & 8'
 Custom brackets,no drill (frame) clamp on $239.95
31565
  
02-06
Dodge
 Ram Pickup 1500
6-1/2' & 8'
Custom brackets, drilling required
 $136.95
31566   09-12
Dodge
 Ram Pickup 1500
6-1/2' & 8'
 Custom brackets,no drill (frame) clamp on $239.95
31565
  
03-09
Dodge
 Ram Pickup 2500,3500 (except 3500HD 4WD)
6-1/2' & 8'
Custom brackets, drilling required
 $136.95
31413
  
03-11
Dodge
 Ram Pickup 2500, 3500
6-1/2' & 8'
Spacer tubes & custom brackets w/hardware kit; no drill (frame) clamp-on
 $239.95
31413
 
02-06
Dodge
Ram Pickup 1500 (Except '06 1500 Non-MegaCab
6 1/2' & 8'
Spacer tubes & custom brackets w/hardware kit; no drill (frame) clamp-on
 $239.95
31414   02-06 Dodge Fits Dodge 02-05 Ram Pickup 1500, and 03-05 2500 for use with kit #31404 listed below 6 1/2' & 8' Requires kit #31404 to work, drilling required $89.95
31404
 
94-02
Dodge
Ram Pickup All (Except 2002 1500)
6 1/2' & 8'
Custom brackets, drilling required
 $89.95
31563   93-Older
Dodge
 Ram Pickup (also requires adapter bracket #05680 listed below)
6 1/2' & 8'
Universal bracket kit, drilling required
 $89.95

05680

   93-Older Dodge Ram Pickup Adapter Bracket to be used with kit #31563 6 1/2' & 8' Dodge Ram Pickup Adapter Bracket for kit #31563 $38.95
Ford
 
04-12
Ford
 F-150 (Clamp On) (New Body Style)
6-1/2' & 8'
Clamp on brackets w/hardware kit, no drilling (frame)
 $164.95
31408
  
08-12
Ford
 3/4 & 1 Ton Pickups
6-1/2' & 8'
Requires drilling one 17/32" hole per side
$239.95
 
05-10
Ford
 F-250/F-350 plus 08-09 F-450 Super Duty
6-1/2' & 8'
Custom brackets with hardware kit
$136.95
31408
  
08-12
Ford
 F-250/F-350/F-450 Super Duty
6-1/2' & 8'
Requires drilling one 17/32" hole per side
 $239.95
 
99-07
Ford
 F-250/F-350Super Duty
6-1/2' & 8'
Custom brackets w/hardware kit no drill  (frame)
 $239.95
 
99-04
Ford
 F-250/F-350 Super Duty
6-1/2' & 8'
Four bolt drill, Top frame mounting
 $89.95
 
99-04
Ford
 F-250/F-350 Super Duty
6-1/2' & 8'
Custom brackets w/hardware kit drilling required
 $89.95
 
97-04
Ford
 F-150 Heritage (Old Body Style)
6-1/2' & 8'
Custom brackets w/hardware kit drilling required
 $89.95
 
98-Older
Ford
 F-250/F-350 Super Duty, plu 96-Older F-150/F-250
6-1/2' & 8'
Universal Bracket kit, drilling required
 $89.95
Nissan/Toyota
 
04-09
Nissan
 Titan King Cab, plus '08-09 Titan Crew Cab Pickup
6-1/2' & 8'
Custom brackets with hardware kit drilling required 
 $164.95
 
07-12
Toyota
 Tundra Pickup
6-1/2' & 8'
Custom brackets no drill (frame)
 $139.95
 
99-06
Toyota
 Tundra Pickup
6-1/2' & 8'
Universal bracket kit, drilling required
 $89.95
Universal Style for Older Pickups
      Older Full Size Pickups
6-1/2' & 8'
Universal bracket kit, drilling required
 $89.95
UNIVERSAL BASE RAIL KITS FOR USE WITH THE ABOVE BRACKETS (#31323)
&
DOWN SIZED PICKUPS KIT (Includes: base rails, brackets and installation hardware)
 
 
 
 Universal rail kit for use with custom bracket kits listed above or universal bracket kit listed below
6-1/2' & 8'
 
 $89.95
 
 
 
 Universal bracket kit
6-1/2' & 8'
4-Brackets w/hardware
 $89.95
REPLACEMENT HARDWARE AND ADDITIONAL BRACKET KITS
Order #  
Desription
  
  Left and right angle brackets
1 of each
 $33.95
38968
   Replacement bolts, nuts, spacers, etc. for universal bracket kit #31563
1 box
 $72.95
053362
   Center bolt kit for use with 20K/25K/26K 5th wheel and EZ roller system
1 kit
 $62.95
  Reinforcement Plate
 each
 $8.19
  Spline Stud 1/2" x 1-1/2"
each
 $1.09