Order Tracking View Cart
Search
Electrical Items
Galley Gear & Housewares
Hardware, Fasteners
Ladders & Chairs
Marine Accessories
Motor Locks
Rails & Fittings
Safety Equipment & Anchors
Vents & Deck Plates
Windshields, Boat Covers
Contact Info
Internet Sales
Outside Utah

M-F 8am-5:30pm MST
801-627-2526
Email: info@tjtrailers.com
Local Store Hours
M-F 8am-5:30pm
Sat. 8am-1:00pm
Location
2939 S. Penn. Ave.
Ogden Utah 84401
801-627-0885
Email: info@tjtrailers.com
Trailer Sales
Northern Utah

801-627-0885
Email: Brandon@tjtrailers.com
Outside Utah
Please visit these sites below to find the dealer nearest you.
Big Tex Trailers
Pace American
CM Truck Beds

Ladders & Chairs

Product Name/Description Item Number Price
79756-swim-platform.jpg AFI SWIM PLATFORM
Platform kits are easy to assemble using pre-marked and pre-drilled holes for all hardware assembly attachments. Molded platform manufactured of UV-resistant, high-strength, polyethylene. Anti-skid ribs and textured surface molded onto platform. Handrails, mounting brackets and assembly hardware are stainless steel. Ergonomically designed ladder loop angles outward to provide more comfortable boating access. Platform measures 18" wide at the back, 17" wide at the front, and 15" from front to back.
AFI SWIM PLATFORM- 0/B 67902 79756 $163.95
AFI SWIM PLATFORM- I/O 67903 79801 $172.95
carry-bag-for-chairs.jpg CARRY BAG FOR CHAIRS
The Faulkner carry bag is a great way to carry or protect your recliner from scratches, dirt, water and grease. It's made of tough vinyl coated polyester and a reinforced shoulder strap with an ergonomic support handle for easy for easy carrying. Its vented design prevents mold and mildew and can also serve as a storage bag. Also fits Faulkner and Lafuma XL recliners. Dimensions 41"L x 28"H x 6-1/2"W. 82298 $16.59
749337-detmar-staow.jpg DETMAR STOW-A-WEIGH HINGE LADDERS
A standard transom ladder that needs no straps or ties. The lower part raises, folds back and drops into locked position. To lower, lift up and swing unit down. Tested to 1000 lbs. Made of anodized aluminum, 7/8" o.d. Three steps. Middle mounting bracket is 6"; distance from ladder to boat is 14".
DETMAR STOW-A-WEIGH HINGE LADDER 749337 $115.95
73231-series-ladders.jpg EEZ-IN "E" SERIES LADDERS
An economical boat ladder with plastic steps. Hook swivel through every step. High-impact, sturdy, grooved steps. 1" special alloy drawn aluminum tubing. 15" wide steps.
EEZ-IN "E" SERIES LADDERS- 3 STEP, 7" HOOK 743107 $53.95
EEZ-IN "E" SERIES LADDERS- 3 STEP, 11" HOOK 743106 $53.95
EEZ-IN "E" SERIES LADDERS- 4 STEP, 11" HOOK 743108 $61.95
758694-transom-platform.jpg EEZ-IN "OUT OF SIGHT" TRANSOM PLATFORM LADDER
Folds and stores under transom platform or swim deck. The step in water angles outward for easier boarding. 1" diameter stainless steel, with hardware. 15" wide. Platform Not Included.
EEZ-IN "OUT OF SIGHT" TRANSOM PLATFORM LADDER- 2 STEP 758694 $162.95
743079-bracket-catch.jpg EEZ-IN BRACKET CATCH LADDER WITH PLASTIC STEPS
For small cruisers, runabouts, sailboats with unusual gunwales: where hook-type ladders are not practical. With one pair of catches. 1" aluminum tubing. 743079 $186.95
73258-double-g.jpg EEZ-IN DOUBLE G TRANSOM PLATFORM LADDER
1" stainless steel tubing, hardware and fasteners. Attaches to most transom platforms. Double folding for complete compactness. Steps are bare-foot comfortable. 15" wide, lets down into the water for easy boarding.
EEZ-IN DOUBLE G TRANSOM PLATFORM LADDER- 2 STEP 73258 $197.95
EEZ-IN DOUBLE G TRANSOM PLATFORM LADDER- 3 STEP 73259 $254.95
760482-pontoon-swim.jpg EEZ-IN PONTOON SWIM LADDER
Extra double 1" aluminum tubing with white traction molded plastic steps. Hooks fold flat. 13-1/2" wide. Designed for use on pontoon boats at side gate. Vinyl sleeves on verticals. Attach with Shur-Loc catches (included). 4-step, 50" long. 760482 $179.95
752606-removable.jpg EEZ-IN REMOVABLE SEAT SWIVEL
Quick-release mechanism allows seat to be removed. Sturdy plastic tracks mount permanently on boat. Swivel slides between track and locks into place. Lever allows easy detachment of swivel and seat. 752606 $49.95
741074-replacement.jpg EEZ-IN REPLACEMENT EXTENSION LEGS/STAND OFFS
4-3/4" Standoffs. Sold in pairs 741074 $16.99
758005-seat-slide.jpg EEZ-IN SEAT SLIDE
Adjust boat seats 6" & 11" fore and aft. Use with spider-type castings for 360-degree swivel, or just a slide. Anodized aluminum. 8-1/2"W X 13-1/4"L X 1-5/8"H.
EEZ-IN SEAT SLIDE- 13" 758006 $133.95
EEZ-IN SEAT SLIDE- GARELICK 758005 $113.95
73418-seat-swivel.jpg EEZ-IN SEAT SWIVEL
360-degree swivel, with self-lubricated, non-corrosive poly swivel bearings. Heavily plated to resist corrosion. Easy to mount type has a larger bottom half to mount from the top side.
EEZ-IN SEAT SWIVEL- 7DEG, 6" x 6" 73419 $24.95
EEZ-IN SEAT SWIVEL- FLAT, 6" x 6" 73418 $18.59
754100-small-fold.jpg EEZ-IN SMALL FOLD DOWN SWIM PLATFORM STEP
2 steps. 1" alloy drawn, anodized aluminum tubing; cut and move to size. Non-slip oval anodized aluminum steps, polypropylene strap locks ladder up. Stainless steel hard-ware. Adjustable mounting, stand-off brackets. 754100 $119.95
755466-small-fold.jpg EEZ-IN SMALL FOLD DOWN TRANSOM LADDER
1" aluminum tubing, non-slip modified oval steps, stainless steel fasteners: assembled, ready to install on most angled or curved transoms. With unique attaching brackets, lock up strap. 3 steps; mounts in 6-1/2" x 12" area. 755466 $139.95
46389-filmtech.jpg FILMTECH HARD SURFACE PROTECTION
This is a specially designed, self-adhesive polyethylene film for temporary protection of hard surfaces, such as factory finished hardwood, linoleum, laminate and ceramic tile floors and countertops. Avoids scuffing. This tear resistant blue tinted film is easy to apply and remove. Save your hard earned profits with this protection and also reduce or eliminate costly clean-up. Saves time and expense. 200' x 24" roll. 42085 $63.95
732435-folding-step.jpg FOLDING STEP
For hatches, transoms, hull uses. Bronze, chrome plated, folding step, with brass spring to secure step in closed position. With hardware. Base size: 4-5/8" x 2"; Step size: 4-3/8" x 2 1/8". 732435 $56.95
746017-boat-seat.jpg SEASENSE CLAMP-ON SEAT BRACKET
Adjustable zinc plated steel clamp-on seat bracket with 360 degree swivel base. Great for Jon boats and canoes. Vinyl coated clamps. Adjusts 7"-16" 85693 $33.95
743153-perko-step-plates.jpg PERKO STEP PLATES
Black molded plastic non-skid step pads in die-cast alloy, Chrome-plated plates. Sold in pairs in a display pack. Pre-drilled for 2 or 4 screw fasteners.
PERKO STEP PLATES- 2-1/4" x 8-3/8" Plates 743153 $28.95
PERKO STEP PLATES- 3-1/4" x 8-3/8" Plates 743154 $32.95
753646-swim-platform.jpg SWIM PLATFORM WITH BOARDING STEP
Comes complete with brackets, mounting hardware, teak boarding step and with your choice of 1 or 2 grab rails. Platform is 18" W x 15" D.
SWIM PLATFORM WITH BOARDING STEP- 18" Teak O/B Platform, 2 Rails 753646 $211.95
70896-pin-pedestal.jpg SWIVL-EZE 3/4" PIN PEDESTAL SETS
Three part pin type pedestal set (3/4" pin type 11" extension, seat mount, and base). Corrosion-resistant seat mount swivels 360-degrees and has lean back angle to 3-degrees. Pedestal bases accept pin type ski tow bars. 14" rise.
SWIVL-EZE 3/4" PIN PEDESTAL SETS- 3/4" Pin Aluminum Pedestal Set, 7" x 7" Square Aluminum Base Plate, 11" Post 70899 $51.95
SWIVL-EZE 3/4" PIN PEDESTAL SETS- 3/4" Pin Pedestal Set, 6" x 8" Stainless Steel Base Plate, 11" Post 70896 $57.95
70906-pin-power.jpg SWIVL-EZE 3/4" PIN POWER PEDESTALS
Fits all 3/4" pin-type bases. 1.77" aluminum tube with brushed finish. Features gas-filled cylinder. Control height with the touch of a lever. Black powder coated fixed seat mount. The #3204 models adjust from 24" to 30":.
SWIVL-EZE 3/4" PIN POWER PEDESTALS- #3204 70913 $86.95
70889-pedestal-bases.jpg SWIVL-EZE ALUMINUM LOCK'N PIN PEDESTAL BASES
Strong yet light aluminum bases with scratch resistant pebble finish. Contains plastic bushings as bearing surface, and six countersunk mounting holes. For 3/4" pin type extensions, seat mounts, and ski tow bars. Packaged.
SWIVL-EZE ALUMINUM LOCK'N PIN PEDESTAL BASES- 6X8 70886 $34.95
SWIVL-EZE ALUMINUM LOCK'N PIN PEDESTAL BASES- 7X7 70889 $25.95
SWIVL-EZE ALUMINUM LOCK'N PIN PEDESTAL BASES- 8" ROUND 70887 $28.95
71490-bench-style.jpg SWIVL-EZE BENCH-STYLE SEAT MOUNTS
Great for mounting seats in jon boats. Constructed of quality aluminum. Kit includes set plate and 15" rails. 71490 $31.95
70867-fixed-height.jpg SWIVL-EZE FIXED HEIGHT WEDGE POST
Accepts all Wedge or competitive bases. Satin Anodized aluminum tube. Matches taper in base. Precisely positioned locking tab positively locks post to base. Engineered Wedge bushing provides a snug, stable fit. Incorporates a 2-point stainless steel riveting system.
SWIVL-EZE FIXED HEIGHT WEDGE POST- 11" RISE 2" DIA 70867 $17.39
SWIVL-EZE FIXED HEIGHT WEDGE POST- 11" RISE 2-3/8" DIA 71905 $27.95
70951-flat-swivel.jpg SWIVL-EZE FLAT SWIVEL
7" square swivel on 5 1/4" center slot hole pattern. Zinc plated. 70951 $10.19
70890-pin-seat-mounts.jpg SWIVL-EZE LOCK'N PIN SEAT MOUNTS
7" square with 5-1/4" centers on hole pattern. Spring mount (70890) or a short shaft without spring (70891). Heavy duty steel construction and zinc plated for corrosion protection. Rotates 360 degrees with a three degree tilt. Carded.
SWIVL-EZE LOCK'N PIN SEAT MOUNTS- 3/4 PIN SEAT MT W/ SPRING 70890 $13.59
SWIVL-EZE LOCK'N PIN SEAT MOUNTS- 3/4 PIN SEAT MT W/O SPRING 70891 $15.89
70897-pin-type.jpg SWIVL-EZE PIN-TYPE POSTS
3/4" pin extends 2-3/4" below deck; fits all 3/4" pin-type bases. Satin finish aluminum.
SWIVL-EZE PIN-TYPE POSTS- 3/4 PIN POST ALUM 13" RISE 70921 $18.19
SWIVL-EZE PIN-TYPE POSTS- 3/4 PIN POST ALUM 16" RISE 71904 $19.69
70927-snap-lock-base.jpg SWIVL-EZE SNAP-LOCK BASE PLATE
1.77" Snap-Lock system is designed with safety in mind. All Snap-Lock components snap together to prevent unintentional detachment. This model incorporates an ergonomic locking handle with stainless steel components. Aluminum, 9" Round, 2.75" Dia. Mounting hole. 71483 $33.95
70882-stainless-steel.jpg SWIVL-EZE STAINLESS STEEL PIN PEDESTAL BASES
Satin finish stainless steel with plastic bushings. For 3/4" pin type extensions, seat mounts, ski tow bars. 6 countersunk mounting holes.
SWIVL-EZE STAINLESS STEEL PIN PEDESTAL BASES- 3/4" PIN BASE S/S 4X8 NYL BUS 70885 $25.95
SWIVL-EZE STAINLESS STEEL PIN PEDESTAL BASES- 3/4" PIN BASE, S/S 7X7 70882 $26.95
70865-wedge-post.jpg SWIVL-EZE WEDGE POST BASE
Features snug taper fit to post and seat mount. Accepts all Wedge or competitive posts. Brushed aluminum finish. Post locks into 9" dia. base. Protrudes 2" below deck. 2" dia., 9" round. 70865 $29.95
70881-wedge-power.jpg SWIVL-EZE WEDGE POWER POST
Fail-proof tapered seating system is designed and engineered to slide together, so it's easy to install and detach. Just the touch of a lever lets you adjust up or down; no more fumbling beneath your seat for a pin or a handle! Wedge Power Post accepts all Wedge or competitive bases. 2" anodized aluminum tube features a gas-filled cylinder. Black cast aluminum seat mount.
SWIVL-EZE WEDGE POWER POST- WEDGE POWER POST 16"-20" 70879 $101.95
SWIVL-EZE WEDGE POWER POST- WEDGE POWER POST 24"-30" 70881 $83.95
70866-wedge-seat.jpg SWIVL-EZE WEDGE SEAT MOUNT
Tapered adapter matches taper in base. Locks into base with 360-degree swivel at 3-degree angle. Also fits 3/4" pin post as well as Wedge post and base. Cast aluminum construction resists corrosion. 2" dia., carded. 70866 $21.95