|
|
|
Pumps
 |
ATTWOOD AUTOMATIC FLOAT SWITCH WITH COVER
|
Converts any bilge pump that draws 10 amps or less to fully automatic operation. Compact, low-profile design - mounts on any surface from horizontal to 35 degrees. Switch can be permanently attached to matching bracket on V-series pump housing. Can also operate competitive model bilge pumps up to 10 amps. The cover dampens bilge sloshing to reduce pump cycling and prevents debris interference. Switch mechanism is completely isolated and sealed to resist moisture, fume-ignition and electrical shock. Contains no harmful mercury or flexing wires. Actuates pump motor at 2" water level. |
73148 |
$35.95 |
 |
|
|
 |
ATTWOOD AUTOMATIC FLOAT SWITCH- CO COVER
|
Automatic float switch converts any bilge pump that draws 10 amps or less to fully automatic operation. Because the manual pump may already be installed in a confined area, the switch features a compact, low-profile design. Mounts on any surface from horizontal up to a 35ª angle. Automates any bilge pump that draws 10 amps or less at 12 volts D.C. 6-32 volts D.C. only. Dimensions: 3" H x 3-1/4" W x 4-3/4" L. (This switch does not have a cover.) |
79048 |
$30.95 |
|
|
|
 |
ATTWOOD SAHARA SERIES AUTOMATIC BILGE PUMPS
|
The Sahara series of automatic bilge pumps comes equipped with non-mercury, non-toxic float switches. Pumps are durable and easy to install, and offer boaters a sleek design that has been tested relentlessly to deliver reliable, efficient, automatic operation in harsh saltwater and freshwater uses. Sahara pumps feature an improved pump chamber and motor housing, using the most advanced materials, including the best-quality bearings and state-of-art brushes, alloys and magnets for extended pump life. Atwood's exclusive molded 3-wire seal is permanently fused to the insulation to prevent a leak path. Wiring on the Sahara series pump is caulked to eliminate wicking and prevent water damage, and is tinned for corrosion resistance. All pumps in the Sahara series are 5-1/2"L x 3-1/4"W x 4H, providing convenient automatic operation even in restricted spaces. Wire/Connector: 36" wire. 3-year mfr. warranty. |
|
SAHARA SERIES BILGE PUMP: 500 GHP (300 GHP AT 3.3 FT. HEAD AT 12VDC, 1.2 AMP DRAW AT 12VDC, 3/4" I.D. HOSE) |
27690 |
$63.95 |
|
|
SAHARA SERIES BILGE PUMP: 750 GHP (480 GHP AT 3.3 FT. HEAD AT 12VDC, 2.5 AMP DRAW AT 12VDC, 3/4" I.D. HOSE) |
27691 |
$90.95 |
|
|
|
 |
BECKSON "THIRSTY MATE" HAND BILGE PUMPS
|
Made of vinyl, no rust, no corrosion. Self-priming, easy to clean. Flexible hose included. |
|
BECKSON THIRST MATE HAND LIQUID PUMP |
738229 |
$34.95 |
|
|
BECKSON "THIRSTY MATE" HAND BILGE PUMPS- Hand Pump, 1 1/2" Dia. x 24" Long, 7 Strokes/Gallon, Pumps 10 Gallons Per Min., Includes 24" Hose |
79309 |
$37.95 |
|
|
BECKSON "THIRSTY MATE" HAND BILGE PUMPS- Hand Pump, 1-3/4" Dia. x 24" long, 6 Strokes/Gallon, Pumps 10 Gallons Per Min., Includes 24" Hose |
735450 |
$41.95 |
|
|
BECKSON "THIRSTY MATE" HAND BILGE PUMPS- Hand Pump 1-3/4" Dia. x 36" Long, 4 Strokes/ Gallon, Pumps 13 Gallons Per Min., Includes 6' Hose |
79308 |
$61.95 |
|
|
BECKSON "THIRSTY MATE" HAND BILGE PUMPS- Hand Pump, 1 3/4" Dia. x 36" Long, 4 Strokes/Gallon, Includes 36" Hose |
736213 |
$51.95 |
|
|
|
 |
FIRST MATE BILGE PUMP
|
This low profile, 400 GPH bilge pump is engineered for long life and high perform-ance capa-city. The full sized compo nent pump weighs only 12 oz., is 3-7/8" high and uses a 3/4" hose. |
79962 |
$19.99 |
|
|
|
 |
MAYFAIR "PRO LINE" JETTISON BILGE PUMPS
|
Features 2 anti-airlock attachments, easy twist lock, quick release mounting bracket, 316 stainless steel shaft with expanded water cooled housing, bi-mount brackets. 4 lock positions. Rugged ABS housing, T-slot mount for automatic switches. Measures 4-3/8", uses 3/4" hose. |
|
MAYFAIR "PRO LINE" JETTISON BILGE PUMPS- 750GPH |
743329 |
$41.95 |
|
|
MAYFAIR PRO-LINE BILGE PUMP-500 G.P.H. |
758787 |
$26.95 |
|
|
|
 |
RULE 1100 BILGE PUMP: NON-AUTOMATIC
|
Economical in size and cost, the 1100 G.P.H. pump can be converted to a side or transom mounted pump with a model #66 adapter. Other features include: low Amp draw, miniaturized to fit restricted areas, permanent magnet motor and stainless steel shaft. 1 1/8" outlet. |
763241 |
$48.95 |
|
|
|
 |
RULE 1100 BILGE PUMP: RULE-MATE
|
The Rule 1100 offers impressive pumping power for its size and cost. Competitive models in this pumping range are much larger and far more expensive. |
27279 |
$121.95 |
|
|
|
 |
RULE 1500 BILGE PUMP
|
Heavy-duty, submersible, with ignition protection. 1500 G.P.H., 6.9 Amp draw at 12 volts DC. Measures 4 1/4" x 6" high. 1 1/8" outlet. |
736272 |
$105.95 |
|
|
|
 |
RULE 2000 BILGE PUMP: NON-AUTOMATIC
|
Submersible, heavy duty, high capacity, compact. 2000 G.P.H. at 12-volt DC operation. With Teflon seals for dependable, trouble-free operation. 1 1/8" outlet hose, measures 4 1/4" x 6" high. |
744357 |
$145.95 |
|
|
|
 |
RULE 360 BILGE PUMP: NON-AUTOMATIC
|
Ideal for small boats, featuring design features in high capacity pump, while keeping cost and size at a minimum. Can be converted to a side or transom mount pump with adapter. Ignition protected, snap-lock base, submersible, permanent magnet motor, stainless shaft, water cooled. 1-yr. limited warranty with consumer proof-of-purchase date. 3/4" outlet. |
761223 |
$22.95 |
|
|
|
|
|
 |
RULE 500 BILGE PUMP: AUTOMATIC
|
PUMP AUTOMATICALLY WITHOUT FLOATS OR SWITCHES: Computerized pumps for smaller boat applications. When a Rule fully automatic pump is turned on, it automatically checks the bilge for water. If water is present, the pump automatically empties the bilge, turns itself off, then enters a monitoring cycle wherein the bilge is monitored every few minutes. Starting and stopping are completely automatic. 1 1/8" hose size on 1100, 3/4" on 500. 1-year mfr. warranty. |
743845 |
$82.95 |
|
|
|
 |
RULE 500 BILGE PUMP: NON-AUTOMATIC
|
Miniaturized pump with high capacity, small size. Ultrasonically welded for strength and protection from leaks, Teflon seal, stainless steel shaft. 500 G.P.H., 2-Amp draw at 12 volts, 3/4" outlet hose. Measures 2 1/4" x 3 1/2" high. |
746264 |
$31.95 |
|
|
|
 |
RULE 500 BILGE PUMP: RULE-MATE
|
The Rule 500 offers many design features while keeping size and cost to a minimum. Especially popular on smaller craft, Rule 500 pumps are unmatched in pumping power and longevity. |
27277 |
$67.95 |
|
|
|
 |
RULE 700/ 750 BILGE PUMPS
|
Rule's 700 and 750 GPH pumps offer increased capacity in keepin with it's 3/4" discharge outlet. |
|
RULE 700 BILGE PUMPS: NON-AUTOMATIC- CARTRIDGE |
27684 |
$59.95 |
|
|
RULE 750 BILGE PUMP: RULE-MATE |
27278 |
$92.95 |
|
|
|
 |
RULE 800 BILGE PUMP: NON-AUTOMATIC
|
This pump is designed for smaller boats and provides unique mounting features and versatility. It has a stainless steel shaft, a nylon impeller design and is easy to install. 4" H x 3" W. 2-yr. limited mfr. warranty; requires consumer proof-of-purchase date. 3/4" discharge outlet. |
763240 |
$45.95 |
|
|
|
 |
RULE BILGE PUMPS: REPLACEMENT MOTOR CARTRIDGES
|
replacement motor modules for aerator pumps. |
|
RULE BILGE PUMPS: REPLACEMENT MOTOR CARTRIDGES- 500 GPH FOR 27686 |
27687 |
$26.95 |
|
|
RULE BILGE PUMPS: REPLACEMENT MOTOR CARTRIDGES- 700 GPH FOR 27684 |
27685 |
$39.95 |
|
|
|
 |
SHURFLO AQUA KING MULTI FIXTURE AUTOMATIC DEMAND PUMPS
|
Potable self-priming water pump features three independent pumping chambers to lift water up to 8 ft., smoothly and quietly. The integrated low R.P.M. permanent magnet motor, matched to the pump, gives maximum whisper quiet performance. 12 Volt DC, 45psi shut-off pressure. For intermittent duty, multi fixture applications. |
|
SHURFLO MARINE PUMPS- 12V PREMIUM: 3.8 GPM FLOW RATE, 9.5 AMPS (max) |
763274 |
$206.95 |
|
|
SHURFLO MARINE PUMPS- 12V STANDARD: 2.8 GPM FLOW RATE, 2.5 AMPS (max) |
22806 |
$132.95 |
|
|
SHURFLO MARINE PUMPS- 12V REPLACEMENT PARTS: CHECK VALVE KIT |
24431 |
$11.79 |
|
|
SHURFLO MARINE PUMPS- 12V REPLACEMENT PARTS: LOWER HOUSING REP. KIT |
24934 |
$33.95 |
|
|
SHURFLO MARINE PUMPS- 12V REPLACEMENT PARTS: VALVE ASSEMBLY |
24429 |
$18.39 |
|
|
|
 |
SHURFLO BAITMASTER PUMP
|
Continuous duty pump is the choice of over 90% of today's sport fishing boat manufacturers. Perfect for livewell or washdown applications in hostile environments. With its ShurCote waterproof coating, Baitmaster is immune to splashed liquids, rugged enough to stand up to applications which turn other pumps to scrap. Self primes to 12 feet. 3.6 GPM, 12V DC; 10 PSI, livewell use, 45 psi washdown use; 9.5 amps (max.). |
25303 |
$274.95 |
|
|
|
 |
SHURFLO BLASTER PUMP
|
Blasts the dirtiest decks clean easily with its powerful continuous flow. Perfect for tough washdown applications such as fish box, scaling and anchor chain cleaning areas. Includes non-corrosive Blaster nozzle. Able to run dry without damage, self primes to 12 feet, thermally protected and UL Marine Approved. 3.2 GPM, 40 psi, 12 VDC, 4.0 Amps @ open flow. |
25302 |
$136.95 |
|
|
|
 |
SHURFLO PRO BLASTER MARINE TOUGH WASHDOWN PUMP
|
3.4 GPM, 12V DC, 45 PSI, 4.0 AMPS @ OPEN FLOW. Blast the grimiest decks clean easily with the powerful continuous flow Pro Blaster. Perfect for tough washdown applications such as fish box, scaling and anchor chain cleaning areas. With its ShurCote waterproof coating, the Pro Blaster is immune to splashed liquids and rugged enough to stand up to applications which turn other pumps to scrap. 2-year warranty. Self-primes to 12'. UL Marine listed. Includes non-corrosive Blaster Nozzle. |
|
SHURFLO PRO BLASTER PUMP REPLACEMENT PARTS: CHECK VALVE KIT |
24431 |
$11.79 |
|
|
SHURFLO PRO BLASTER" MARINE TOUGH WASHDOWN PUMP w/ NOZZLE |
25813 |
$199.95 |
|
|
|
 |
T-H WIRE MESH STRAINER
|
Stainless steel screw-on strainer for effective and dependable straining of trash and fish scales in bait wells and livewells. Screws on threaded portion of pump on transom side, or onto right angle thru-hull fitting. Formed wire mesh cloth in black PVC base, with internal 3/4" female pipe threads. |
759120 |
$11.99 |
|
|
|
|
