|
|
|
|
 |
FLEX-GUARD FLEXIBLE TUBING
|
Provides flexible, crush-resistant protection for your wiring assemblies. The split seam feature allows wires to be inserted easily, eliminating the costly time needed to apply tape, braid or loom. |
|
FLEX-GUARD FLEXIBLE TUBING- 1/4X14FT |
15466 |
$4.79 |
 |
|
FLEX-GUARD FLEXIBLE TUBING-3/8X10FT |
11700 |
$4.79 |
|
|
FLEX-GUARD FLEXIBLE TUBING- 1/2X7FT |
11701 |
$4.79 |
|
|
FLEX-GUARD FLEXIBLE TUBING- 3/4X5FT |
11702 |
$3.49 |
|
|
FLEX-GUARD FLEXIBLE TUBING- 100' 1/4ID |
17919 |
$26.95 |
|
|
FLEX-GUARD FLEXIBLE TUBING- 100' 3/8ID |
17920 |
$21.69 |
|
|
FLEX-GUARD FLEXIBLE TUBING- 100'1/2ID |
17921 |
$30.95 |
|
|
FLEX-GUARD FLEXIBLE TUBING- 100' 3/4ID |
17922 |
$41.95 |
|
|
|
 |
HEAT SHRINK TUBING
|
Heat shrinkable tubing is highly flexible, flame retardant, that is intended for general purpose automotive applications. It is strong and will not melt or split when shrunk over irregular-shaped objects. Shrinks to 50% of expanded size, as listed below. |
|
HEAT SHRINK TUBING ASS. PK/6 |
11697 |
$2.69 |
|
|
HEAT SHRINK TUBING PKG/6 ASSORT. |
11698 |
$2.69 |
|
|
HEAT SHRINK TUBING PKG/7 3/16 4" |
15465 |
$2.69 |
|
|
HEAT SHRINK TUBING-PKG/6 1/4 4" |
11695 |
$4.19 |
|
|
HEAT SHRINK TUBING-PKG/9 3/8 4" |
11696 |
$4.19 |
|
|
|
 |
NYLON CABLE CLAMPS
|
Durable nylon clamps for channeling cable and wire. White. |
|
NYLON CABLE CLAMPS- 1/2" PKG/15 |
10795 |
$2.89 |
|
|
NYLON CABLE CLAMPS- 1/2" PKG/500 |
17918 |
$36.95 |
|
|
NYLON CABLE CLAMPS- 1/4" PKG/25 |
10791 |
$2.69 |
|
|
NYLON CABLE CLAMPS- 1/4" PKG/500 |
17914 |
$25.95 |
|
|
NYLON CABLE CLAMPS- 3/8" PKG/22 |
10793 |
$2.89 |
|
|
NYLON CABLE CLAMPS- 3/8" PKG/500 |
17916 |
$25.95 |
|
|
NYLON CABLE CLAMPS- 5/16" PKG/25 |
10792 |
$2.69 |
|
|
NYLON CABLE CLAMPS- 7/16" PKG/15 |
10794 |
$2.69 |
|
|
NYLON CABLE CLAMPS- 1/2" PKG/500 |
17918 |
$36.95 |
|
|
|
 |
NYLON SCREW MOUNT WIRE TIES
|
Serviceable at temperatures to 275-degrees F., maximum life and stength is attained at temperatures below 185-degress F. With mounting hole. |
|
NYLON SCREW MOUNT WIRE TIES- 14-1/2" L., NATURAL- PKG/6 |
16113 |
$2.69 |
|
|
NYLON SCREW MOUNT WIRE TIES- 8" BLACK- PKG/500 |
17913 |
$78.95 |
|
|
NYLON SCREW MOUNT WIRE TIES- 8" L. NATURAL- PKG/500 |
17912 |
$61.95 |
|
|
NYLON SCREW MOUNT WIRE TIES- 8" L., BLACK- PKG/11 |
16110 |
$2.69 |
|
|
|
 |
WIRTHCO FUSETAPPER
|
The Fusetapper is designed to make it easy to add a circuit to new flat automotive fuseblocks. Pick the circuit or fuse that is to be used and simply slip the Fusetapper over one leg of the fuse. Then insert the fuse and the Fusetapper into the fuseblock. Put the Fusetapper on the hot side of the fuse and use an inline fuse and fuseholder to protect your new circuit. Put the Fusetapper on the cold side "protected side" of the fuse and the fuse will protect your new circuit. When installed, a quarter inch tab will protrude above the fuse block. Onto this tab place the fully insulated female push-on terminal. After installation is complete, bend the Fusetapper flat to the fuseblock to save space. |
17869 |
$5.69 |
|
|
|
 |
WIRTHCO MINITAPPER
|
The minitapper makes it easy to pick up power at the new minifuse blocks. And it's easy to install, remains firmly in place in the new minifuse blocks and assures the user of a dependable power source. Minitappers come with a fully insulated terminal so that the installer needs only to (1) crimp the terminal on the power lead wire, (2) put the terminal on the Minitapper, (3) insert the minitapper into the hot side of an empty fuseblock cavity, and (4) install an inline fuseholder and fuse in this new hot lead. |
17873 |
$5.79 |
|
|
|
