RV Lights - Incandescent clearance & taillights

Super rugged combination reflector and clearance or side marker light. Mount with 2 screws, without disassembly. Recessed lens protected from rocks and gravel. Exclusive: "slope-side" design protects light from side impacts. One wire. All metal parts are stainless steel. Black housing. Overall size: 4" x 2-3/8" x 1".

Single stud, 2-3/4" x 2-1/8" x 1" combination side marker light and reflector. Black housing.

Socket is water resistant and is assembled with slight but firm rotating motion. Polar White. SAE approved. 4" x 2" x 1-13/16". Replacement lens is 4" x 2" x 3/4". Bulb #194.

Socket is waterproof and is assembled with slight but firm rotating motion. Mounting screws are concealed beneath cover. Polar White. SAE approved. 3-7/8" x 1-7/8" x 1-3/4". Replacement lens is 3-7/8" x 1-7/8" x 5/8". 12 Volt. Bulb #194. Square corners.

Socket is waterproof and assembled with slight but firm rotating motion. Mounting screws are concealed beneath cover. Polar white. SAE approved. 3-7/8" x 1-7/8" x 1-3/4". Replacement lens is 3-7/8" x 1-7/8" x 5/8". 12 Volt. Bulb #194.

A gem of miniaturization; unbelievably compact yet packed with quality features. Base has external mounting holes with 2-3/4" centers. Acrylic lens locks into base, cannot be knocked out by tree limbs, etc. Overall size: 3-1/4"L; 1"W; 1-1/8"H. Uses replacement bulb #194.

Peterson rectangular style dual bulb clearance and marker light. 4"L x 2"W x 1-1/8"H.

Acrylic lens features built-in reflex reflector and exclusive "cross optics" for brilliant signal. Eliminates separately mounting a reflector. Uses patented Vibar socket to prolong bulb life. 4-1/8"L x 2"W x 1-1/32"H. Mounts with two screws on 3" centers. Oval shaped. Uses #194 bulb.

Acrylic lens features built-in reflector which eliminates the need for a separate reflector. Mounts on 3" centers. The twist-in socket assembly contains both lead and ground wires for mounting to all surfaces. Uses replacement bulbs 193/ 194.

Marker light commonly used by Fleetwood and many other RV manufacturers. 1-3/4" x 4". Screws included, Pk/1.

Weather-tight marker light used on late model Winnebago motor homes & other RV's. 1-3/8" x 4". Screws included, pk/1.

Side marker lights with built-in reflex reflectors. Feature quick-connect/ disconnect wiring and interchangeable lenses. Lenses are easily removed for quick bulb replacement. 3-1/8" x 2-3/8" overall; ear mount is 3-7/8" x 2-3/8" with mounting holes on 3-5/16" centers. Lens size: 2-3/4" x 2-1/4".

All weather design; replaceable lens and #57 automotive bulb; and Wesbar's Quick Connect/ Disconnect wiring method are some of the features found in these lights. May also be mounted at a 45 degree angle from the center line and used as a combination side marker and clearance light. (Note: reflex reflector is not included.) Light size, overall: 2-1/4" x 2-1/4" x 1-1/4".

Made of extra tough polycarbonate that resists breakage with a stainless steel base that deters corrosion. The light bulb is contained in a permanently sealed compartment and comes with a pre-installed 15" lead wire. Stud mount model. 2-1/8" x 1-1/8" x 1-1/16". White housing.