Axle - 2,000 lb. Replacement Parts (Hubs, Bearings, Seals, Brakes, Etc)

Replacement hubs, bearings, seals, caps, nuts, u-bolts, brakes, and more for most axles up to a 2,000 lb. rating.

4 LUG ON 4" BOLT CIRCLE - IDLER HUB, FITS 44643 OR 44649 BEARINGS

Uses L44643 OR L44649 Inner/ Outer Bearings.
Capacity of 1,000lbs per each.

Note: Replacement hubs come with races already installed.

62077 - HUB ONLY - 4 ON 4 BOLT PATTERN - USES L44643 OR L44649 BEARINGS $35.9544643 - BEARING #L44643 - 1.000" I.D. $5.9544649 - BEARING #L44649 - 1.063" I.D. $6.99446491 - TIMKEN #LM44649 BEARING (CONE) $27.2944610 - BEARING RACE FOR L44643 & L44649 BEARINGS $3.4560040 - GREASE SEAL - 1.983" OD x 1.250"ID DOUBLE LIP $2.7960070 - GREASE SEAL - 1.987" OD x 1.5" ID, DOUBLE LIP $2.9567131 - GREASE CAP, DRIVE-IN, 1.986" OD (NOT FOR EZ LUBE) $2.9567091 - GREASE CAP, DRIVE-IN, EZ LUBE, 1.986" OD (REQUIRES #67211 RUBBER PLUG) $4.9567211 - RUBBER PLUG FOR EZ LUBE GREASE CAPS 2K - 7K $1.2538091 - 1/2"-20 LUG NUT, OPEN END, 60 DEGREE CONED, USES 13/16" SOCKET $0.95

Add To Cart

Hub kit and components for 2,000 lb axles

4 BOLT, 4" BOLT CIRCLE - FITS BT8 1" SPINDLE

Hub kits and components for BT8 1" Spindle. Drum Size 7" x 1 3/4". Capacity of 1,250 lbs per each.

65166 - HUB/DRUM ONLY - 4 ON 4 BOLT PATTERN - USES L44643 OR L44649 BEARINGS - FOR 7" BRAKES $71.9544643 - BEARING #L44643 - 1.000" I.D. $5.9544610 - BEARING RACE FOR L44643 & L44649 BEARINGS $3.4560040 - GREASE SEAL - 1.983" OD x 1.250"ID DOUBLE LIP $2.7967131 - GREASE CAP, DRIVE-IN, 1.986" OD (NOT FOR EZ LUBE) $2.9534155 - SCREW IN STUD 1/2 x 2" FINE THREAD BOTH ENDS $5.9538091 - 1/2"-20 LUG NUT, OPEN END, 60 DEGREE CONED, USES 13/16" SOCKET $0.95

Add To Cart

4 BOLT, 4" BOLT CIRCLE - FITS 1 1/16" SPINDLE

Fits Dexter 2,000 lb axle with a 1 1/16" spindle. Standard Grease or E-Z lube application.
Drum size 7" x 1 3/4".

65166 - HUB/DRUM ONLY - 4 ON 4 BOLT PATTERN - USES L44643 OR L44649 BEARINGS - FOR 7" BRAKES $71.9544649 - BEARING #L44649 - 1.063" I.D. $6.9944610 - BEARING RACE FOR L44643 & L44649 BEARINGS $3.4560080 - GREASE SEAL - 1.987" OD x 1.5" ID SINGLE LIP $3.9560070 - GREASE SEAL - 1.987" OD x 1.5" ID, DOUBLE LIP $2.9567131 - GREASE CAP, DRIVE-IN, 1.986" OD (NOT FOR EZ LUBE) $2.9567091 - GREASE CAP, DRIVE-IN, EZ LUBE, 1.986" OD (REQUIRES #67211 RUBBER PLUG) $4.9567211 - RUBBER PLUG FOR EZ LUBE GREASE CAPS 2K - 7K $1.2534155 - SCREW IN STUD 1/2 x 2" FINE THREAD BOTH ENDS $5.9538091 - 1/2"-20 LUG NUT, OPEN END, 60 DEGREE CONED, USES 13/16" SOCKET $0.95

Add To Cart

5 bolt hub kit and components for 1 1/16

5 BOLT HUB/DRUM, 4.5" BOLT CIRCLE - 1 1/16" SPINDLE - 2,000 LB AXLES

Fits 2,000 lb axle with 1 1/16" Spindle. Drum size 7" x 1 3/4".
Note: Replacement hub/drums come with races and lug studs already installed.

65171- HUB/DRUM ONLY, 7" X 1 3/4", 5 ON 4.5" BOLT PATTERN, USES L44643 OR L44649 BEARINGS $99.9544649 - BEARING #L44649 - 1.063" I.D. $6.9944610 - BEARING RACE FOR L44643 & L44649 BEARINGS $3.4560080 - GREASE SEAL - 1.987" OD x 1.5" ID SINGLE LIP $3.9560070 - GREASE SEAL - 1.987" OD x 1.5" ID, DOUBLE LIP $2.9567131 - GREASE CAP, DRIVE-IN, 1.986" OD (NOT FOR EZ LUBE) $2.9567091 - GREASE CAP, DRIVE-IN, EZ LUBE, 1.986" OD (REQUIRES #67211 RUBBER PLUG) $4.9567211 - RUBBER PLUG FOR EZ LUBE GREASE CAPS 2K - 7K $1.2534155 - SCREW IN STUD 1/2 x 2" FINE THREAD BOTH ENDS $5.9538091 - 1/2"-20 LUG NUT, OPEN END, 60 DEGREE CONED, USES 13/16" SOCKET $0.95

Add To Cart

5 BOLT HUB/DRUM, 4.5" BOLT CIRCLE - FITS BT8 1" SPINDLES 2,000 LB AXLES

Fits BT8 1" Spindle for 2,000 lb. axles. Drum size 7" x 1 3/4".
Note: Replacement hub and drum comes with races already installed.

65171- HUB/DRUM ONLY, 7" X 1 3/4", 5 ON 4.5" BOLT PATTERN, USES L44643 OR L44649 BEARINGS $99.9544643 - BEARING #L44643 - 1.000" I.D. $5.9544610 - BEARING RACE FOR L44643 & L44649 BEARINGS $3.4560040 - GREASE SEAL - 1.983" OD x 1.250"ID DOUBLE LIP $2.7967131 - GREASE CAP, DRIVE-IN, 1.986" OD (NOT FOR EZ LUBE) $2.9534155 - SCREW IN STUD 1/2 x 2" FINE THREAD BOTH ENDS $5.9538091 - 1/2"-20 LUG NUT, OPEN END, 60 DEGREE CONED, USES 13/16" SOCKET $0.95

Add To Cart

62041 - RIGHT HAND BRAKE ASSEMBLY 7" x 1 1/4"

SKU 62041 - 23-48

$152.95

7" x 1 1/4" electric brake assembly for Dexter and other 2,000-2,200 lb axles.
Right Hand Assembly.

Qty:

62051 - LEFT HAND BRAKE ASSEMBLY 7" x 1 1/4"

SKU 62051 - 23-47

$152.95

7" x 1 1/4" electric brake assembly for Dexter and other 2,000-2,200 lb axles.
Left Hand Assembly.

Qty: