Trailer Connectors and Switches

This popular 4-way chrome plated zinc die cast connector features a spring-loaded cover, high-impact insulators and split brass contacts. 12-24 volts, 20 Amp.

This 4-way Die Cast Trailer Connector is used on agricultural and utility trailers without electric brakes. It features concealed terminals, stainless steel cover spring and finger grips for positive pull. This unit is dust and water resistant, and is interchangeable with other brands of connectors.

This popular 5-way chrome plated zinc die cast connector is used on small trailers where an extra circuit is needed. It features a spring-loaded cover, high-impact insulators and split brass contacts. 12-24 volts, 15 amp.

6-way Aluminum Die Cast Trailer Connectors are ideal for horse, farm and utility trailers. They feature a concealed terminal socket design that gives more support and helps save installation time. They are dust and water resistant, and interchangeable with other brands of connectors.

This Connector is used on most RV travel trailers. The heavy-duty plating is for maximum weather and corrosion resistance. This connector features a stainless steel cover spring and a unique safety latch that prevents damage from accidental pull-away. It has the latest design, self-wiping pressure contacts and vinyl insert to keep out dirt. It is interchangeable with other 7-way RV connectors. 12 volts, 30 amps.

This Zinc Die Cast 7-way Connector is designed for heavy-duty usage. Excellent for semi and utility trailers. The built-in slant of the socket rids the housing interior of accumulated moisture. Floating pins in the plug and socket allow for easy alignment and maximum contact. The Connector accepts the widest range of wire gauges from 14 gauge to 8 gauge ground wire and is interchangeable with other major brands. 6-28 volts, 40 amps.

This Thermo-plastic 7-way RV Connector has brass contacts to prevent corrosion. The built-in cable clamp prevents wear on 7-way cable. It is interchangeable with other 7-way RV connectors. 12 volts, 30 amps.

This universal all brass heavy-duty Push-Pull Switch has a number of applications, including lights, heaters, wipers, etc., for automotive, truck, marine and farm vehicles. Switches feature a polished chrome face nut and knob, with a brass back nut and washer.

Replacement Turn Signal Flashers for all 12 volt, 2 terminal flashers. Replace the original flasher to eliminate the rapid flashing of turn signals due to increased amperage draw from trailer lights. Flashes 1 to 10 signaling lamps and 2 indicator lamps.

Silver-plated electrolytic copper contacts offer low resistance and high conductivity. Annealed barrel ensures even crimping. Connectors are male/female, with 1-pc., impact-resistant polycarbonate housings. Solid barrel contacts are flared for easy insertion of stripped wire or cable, and supported by tempered stainless steel leaf springs to maintain constant pressure and vibration resistance.