RV Electronics - GPS Navigation & Backup Cameras

Signal performance meets or exceeds current Sensar antenna design. 25% lighter weight antenna head increases longevity of parts and makes hand cranking easier. Built-in amplifier and unique circuitry give you clear VHF/UHF reception when parked. Raise, lower and rotate the Sensar II antenna from inside your RV. Easy to install. Extends just 4" above roof while traveling. Can be elevated to 36" abouve roof line and is directional: you point it towards your desired TV station. Use only while vehicle is parked. The Sensar II antenna is made of tough UV protected Centrex polymer and other materials that will not corrode. Sensar II model RV3095 includes 30 ft. of 75-ohm coaxial cable, 6-ft. TV set cord, mounting hardware and white on/off power supply switch.
SPECIFICATIONS:
Height: lowered= 4", raised= 40". Width: antenna only= 4.75". Length: antenna with elements= 45.5". Impedance= 75 ohm. Amplifier gain: VHF= 15.5 dB avg., UHF= 19.5 dB avg.. Power required= 12VDC at 85 ma.

75 ohm non-amplified version of the RV-3095 can be used on all types of recreational vehicles. The RV-5095 is designed for years of reliable service. Includes antenna, lift assembly, rotating handle, elevating crank assembly and 15 feet of 75 ohm coaxial cable. The RA-7296 wall plate amplifier (not included) will give you improved reception

Combination TV antenna power supply is complete with cable input jack and buolt in 2 set splitter. Wall plate is also equipped for input of satellite signal from an external jack. White only. 1 per pack.

The antenna of choice for a moving vehicle. Lets you enjoy television while riding the highway! Unlike other antennas, the Roadstar is omnidirectional, so it continuously receives VHF/UHF/FM signals from all directions. You'll never have to adjust it, even on winding road. Plus, the built-in, solid state amplifier boosts signals an average of 15dB on VHF and 20 dB on UHF for miles of clear reception. Aerodynamically designed antenna is contained in a slim, stylish, high-impact weather proof and UV protected housing to protect it from the elements, with no moving parts to break or corrode. Includes 30 ft. of 75 ohm coaxial cable, 6 ft. TV set cord with V/U band separator, mounting bracket, hardware, and brown on/off power supply switch, with 12VDC receptacle and two-way splitter for second TV outlet, power/on/off indicator light. 1 year manufacturer's warranty.

Flush mounting 75 ohm TV outlet, input and output connection is through 75 ohm "F" jack. Not isolated. Ivory.

Used with RG-6 coax cable in satelite installations. RG-6 cable is slightly thicker than the standard RG-59, so it requires these connectors.

Includes exterior jack, interior wall plate and 6" hook-up cable. Gold connectors for high quality signal. PK/1 set.

2-WAY: Split 1 source signal to 2 locations. Gold connectors for high quality signal. 2-1/8" x 1-3/4". Mounting screws included. Pk/1.
4-WAY: Digital. Satellite grade

Molded plastic plate for weatherproof entry of multi-conductor cable. Use for dual coax systems.